Fully featured compact marine VHF
Built-in DSC meets RTCM SC-101
Built-in DSC watch function monitors Ch 70 (DSC
channel) activity, even while you are on another channel. In an emergency
situation, a formatted distress call can be sent at the touch of a button.
Digital Selective Calling Features
DSC uses a unique ID (MMSI code) similar to a
telephone number, allowing you to make contact with a specific boater or group
of boaters in your area. A total of 100 address IDs can be stored with a
5-character name.
Position Request and Position Report with External GPS
Receiver
With an external GPS receiver, the position
request and position report functions allow you to exchange ships position.
The received position information can be plotted on a third party GPS or other
navigation equipment which accepts NMEA data format. The polling
(request/reply) function checks whether a specific ship is in the
communication range.
New public address (PA) and RX speaker functions
Use the hand microphone as part of a public
address system and make an announcement on-board or to shore through an
external loud speaker or hailer. The RX speaker function allows you to monitor
the received audio from the loud speaker or hailer while you are on the deck
or tower.
New optional COMMANDMICII™
The new optional COMMANDMICII™makes it convenient
for using the IC-M422 from a separate cabin or tower. It allows you to control
most functions* of the IC-M422, including remote power ON/OFF, PA and RX
speaker functions.
*except DSC operation
Force 5 Audio
The front facing speaker offers loud, crisp
reception that is easy to hear, even over engine or wind noise.
Local function
The local function turns ON the attenuator and
gives you the option to reduce interference from strong stations.
- Submersible* (1m depth for 30 minutes.)
*Equivalent to IPX7, except cables.
- Large 2-digit channel with scrolling names
- 7-step keypad backlighting
- 4-step LCD contrast
- Dual watch and Tri-watch functions
- Super white and black versions available.
- Simple and easy tag scanning system
- NOAA weather channels with alert function
- Low voltage indicator for low battery alert
|
General |
Frequency range
|
: |
Tx
Rx |
156.025 - 157.425MHz
156.050 - 163.275MHz |
|
|
Usable channels |
: |
USA, INT, CAN, WX channels |
|
Type of emission |
: |
16K0G3E (FM), 16K0G2B (DSC) |
|
Power supply requirement |
: |
13.8V DC ±15% |
|
Current drain (at 13.8V DC) |
: |
Tx
Rx |
5.5A (at 25W output)
1.5A (at AF max.) |
|
|
Operating temp. range |
: |
–20°C to +60°C; –4°F to +140°F |
|
Antenna impedance |
: |
50Ω (SO-239) |
Dimensions
(projections not included) |
: |
164(W) × 78(H) × 139.3(D) mm
615⁄32(W)
× 31⁄16(H) × 515⁄32(D)in. |
|
Weight (approx.) |
: |
1070g; 2.4lb |
|
NMEA In/out formats |
: |
RMC, CGA, GNS, GLL |
|
Transmitter |
|
Output power (Hi/Mid/Low) |
: |
25W, 1W (at 13.8V DC) |
|
Modulation system |
: |
Variable reactance freq. mod. |
|
Max. freq. deviation |
: |
± 5.0kHz |
|
Frequency error |
: |
± 10.0ppm (-20°C to +60°C) |
|
Spurious emissions |
: |
Less than –70dBc |
|
Residual modulation |
: |
More than 40dB |
|
Adjacent Ch. power |
: |
More than 70dB |
|
Audio frequency response |
: |
+1dB to -3dB of -6dB octave from 300Hz to 2500Hz |
|
Receiver |
|
Intermediate freq. |
: |
1st 21.7MHz, 2nd 450kHz |
|
Sensitivity |
: |
0.22µV typical at
12dB SINAD |
|
Squelch sensitivity |
: |
Less than 0.22uV |
|
Adjacent Ch. selectivity |
: |
More than 70dB |
|
Spurious response |
: |
More than 70dB |
|
Intermodulation |
: |
More than 70dB |
|
Hum and noise ratio |
: |
More than 40dB |
Audio output power
|
: |
4.5W typical at 10% distortion with a 4Ω load |
|
Audio frequency response |
: |
+1dB to -3dB of -6dB octave from 300Hz to 2500Hz |
All stated specifications are subject to change
without notice or obligation.